Canvas backing with a velcro strip for attaching circles (loop velcro standard), and flaps for storing bags etc.

Children love making use of these panels - especially removing the fabric circles and bags from them!

There are wide velcro strips running down the length of the panel on either side - this allows it to be attached securely to a piece of timber or around a bed end. There are also 10 small loops sewn around the edge of the panel (some on one side, some on the other - see photo) - these are positioned so that the velcro panel can be held in place with strong twine or cord if the timber is too wide for the velcro. They make the velcro panel a lot more adaptable. It can also be attached to things lengthwise by folding the velcro panel into thirds (as it would be when wrapped around a piece of wood). There are loops which will then be in the right place to secure the panel.

Possible places to attach a velcro panel include - around pieces of wood or poles, around bed ends, around the top of cane baskets, around the outside of storage boxes. 


SAFETY WARNING: If using cord, care is needed to ensure the panel is attached securely, and the cord is out of the way ie. it is not tied in such a way that the cord could be a safety hazard. Any item the panel is attached to, needs to be sturdy/heavy enough to not tip over when the velcro circles are removed (children may also pull on the flap). Please be aware that if you attach the panel to a fence or deck railings, children may be able to use it as a foot hold for climbing.


WASHING INSTRUCTIONS -  This product will shrink when first washed, and the fabric will soften. It will also crease - stretching the fabric while wet will help remove creases. Hanging the product out dripping wet, rather than spinning, will greatly reduce creasing. Can be ironed, but do not iron directly on the velcro.


size (after washing) 

approx. 29cm x 56cm